8
i3-TRNG-CAMS-Ax46/66.indd
Rev. 130816
2.
Disassemble camera prior to mounting.
Loosen the set screws on the
camera with the supplied hex key to remove the lower dome.
3.
Attach the camera to the surface.
Fix the mounting base on the surface
with the supplied screws.
4.
Adjust the camera’s pan and tilt position to obtain an optimal view-
ing angle.
Loosen the tilt lock screws inside the camera. Adjust the tilting posi-
tion within 65 degrees and tighten the tilt lock screws. Rotate the black liner to
adjust the panning position within 360 degrees.
5.
Reinstall the lower dome.
Replace the lower dome onto the camera base
and tighten the screws.
Fig 3-5 - Attaching camera to wall
Tilt lock screw
Black liner
Fig 3-6 - Adjusting viewing angle
