34
i3-TRNG-CAMS-Ax46/66.indd
Rev. 130816
•
New Date & Time: You may choose to...
»
Have the Date and Time Set
Manually
date format is YYYY/MM/DD, time
format is HH:MM:SS.
»
Synchronize Date & Time with
Computer Time
or
»
Synchronize Date & Time with
NTP Server
.
•
DST: Check Enable DST to enable Daylight Savings Time. Set the Start time and
End Time by using the appropriate drop-down menus.
System Information:
This section contains information on the Camera’s Model Name, Serial Number and
Firmware version.
Update Firmware:
All Annexxus-series cameras are sold with the most recent version of the firmware
already installed. If in the future firmware updates are released, you can update your
camera’s firmware by first downloading the firmware file from i3 International’s
website or FTP site. After downloading firmware file, click the
Browse...
button
in the camera’s System setup tab and locate the new firmware file. Then click the
Upload
button and wait while the firmware is being updated on your camera.
Note:
Be sure to stop all camera operations prior to an update. Do not turn off
power or disconnect from the network during the process.
Click
Restart
Camera after you have updated firmware successfully.
Restart/Reset:
•
Click
Restart Camera
to restart your Annexxus-series camera. This will cause a
temporary disconnect, no video will be recorded while the camera is restarting
but all custom settings will be saved. Camera restart is required after the
firmware update. After clicking, a pop up will appear asking you to confirm.
Click
Yes
.
•
Click
Reset
to return all settings, except for the Networking (IP) and User
Management settings to factory defaults. After clicking, a pop up will appear
asking you to confirm. Click
Yes
.
•
Click
Default
to return all camera settings, including IP address, to factory
defaults. After clicking, a pop up will appear asking you to confirm. Click
Yes
.
