Installation
Warnings and Operation Notes
Installation and servicing must be performed only by qualified and experienced technicians to conform to all local codes
and to maintain your warranty.
WARNING! The use of CSA certified/ UL Listed Class 2 power adapter is required to ensure compliance.
WARNING! To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.
When installing your Annexxus encoder, be sure to avoid:
excessive heat, such as direct sunlight or heating appliances
moisture and humidity
environments without adequate ventilation
contaminants such as dust and smoke
strong magnetic fields
sources of powerful electromagnetic radiation such as radios or TV transmitters
areas with mechanical vibrations
temperatures below -10° Celsius or 14° Fahrenheit and above 55° Celsius or 131° Fahrenheit.
environments with humidity levels in excess of 90%
Power Supply
Ensure the supplied voltage meets the power consumption requirements of this camera before powering the camera on.
Incorrect voltage may cause irreparable damage to the unit and will effectively void the device warranty.
Installation Requirements and Recommendations
1.
Use provided brackets for rack mount installations.
2.
Ensure ample room for audio and video cables.
3.
When installing cables, ensure that the bend radius of the cables is no less than five times
its diameter.
4.
Connect both the alarm and RS-485 cables.
5.
Allow at least 2 cm (~0.75in) of space between rack mounted devices.
6.
Ensure the Encoder is grounded.
7.
Environmental temperature must remain within the range of -10ºC ~ 55ºC, 14ºF ~
131ºF.
8.
Environmental humidity must remain within the range of 10% ~ 90%.