Annexxus 516 Encoder - User Manual
3.
Click the Set Preset icon
. Your new preset position has been saved.
To call the preset:
1.
In Live View mode, select the desired PTZ channel
2.
Select a preset number from the preset list.
3.
Click the Call Preset icon
. Your selected PTZ camera will move into the saved preset position.
Call PTZ Preset on Alarm
Annexxus 516 allows the PTZ Camera's preset to be recalled automatically in response to a triggered alarm input.
Note:
When configured, this feature will also affect the video feed recorded by SRX-Pro Server.
To link the Alarm Input to the PTZ camera's preset,
1.
In Live View mode,
set
the PTZ camera preset.
2.
Configure the selected Alarm Input in Configuration -> Alarm Settings -> Alarm Input setup.
3.
Go to Configuration -> Remote Configuration -> Alarm Settings -> Alarm Input -> Linkage Method setup.
4.
In the
PTZ Linking
drop-down menu, select PTZ Linking video channel.
5.
Check off
Enable
checkbox next to the Preset No. drop-down menu.
6.
Select configured preset in the
Preset No.
drop-down menu.
7.
Click
Save
.