Page
9
of
20
Moving Head Controller 2.0 Manual Rev2
<Enter>
Auxiliary Button for aiding when in programming or editing modes.
<Slide 1>-
<Slide12>
Customizable faders that send DMX values to the products, one channel per slider. Used in
conjunction with:
•
Light (1..6)
<On-Off/Active>
Control Descriptions
Button or Fader
Description
<Dimmer>
Customizable fader that sends DMX values to the products. This slider should be dedicated to the
Dimmer channel whenever applicable. Used in conjunction with:
•
Light (1..6)
<On-Off/Active>
<Azimuth>
Specialty not customizable fader that it is used in conjunction with:
•
Light (1..6)
<On-Off/Active>
Note:
This Father is used whit lights that are set in Follow-Spot mode. It elevates the point where
the beams meet (above the floor) adding an offset to facilitate illuminating tall subjects.
<Joystick>
Multipurpose Joystick that controls the PAN/Tilt on Light Products, the (X,Y) coordinated for a
Follow-Spot application and navigates through and stepping through all the different menus to edit
parameters, save and recall programs, etc.
•
Run Mode:
- If active Light is in Follow-Spot mode, it controls the (X,Y) coordinates of the Spot.
- If active Light is in PAN/TILT mode, it controls the Pan and Tilt angles of that Light.
•
Programming/Editing mode:
Navigates through Menus and changes parameters.
LCD Display
LCD Display that shows various types of information about current modes, selections and whether
it is in Run, Program or Playback mode among other relevant and useful data.
Naming Pads
Convenient location to add customized naming to the Channel Faders for easy and quick access.
Back Panel View
Back Panel Ports
Port
Function
DC Power In
External PSU port that connects to the power source.
Power Switch
Toggle switch that turns The Moving Head Controller 2.0 ON and OFF.
Note:
The Moving Head Controller 2.0 use a negative pin 2 and positive pin 3
.
DMX Out
3-pin DMX port for connecting to the products.
DMX In
3-pin DMX port for connecting to other DMX Controllers that support up to 512 DMX ch.
Note:
The Moving Head Controller 2.0 use a negative pin 2 (D-) and positive pin 3 (D+)
.
USB Port
USB Port for connecting to a PC.
