I.VA.CO. ICP 255, Installation And Operating Manual

Page: 5 / 20

We recommend ISO VG150 gear oil or equivalent oils.
·
Shell OMALA HD 150 or Amsoil GEAR LUBE 150 or ANDEROL # 4150
The following table gives the approximate quantities of oil required for each model.
Capacity (liter)
0.90
Pump Model
ICV
255 & 305
ICV
405 & 515 1.80
Do not add fill oil with pump running! Do not overfill.
2.0 SAFETY
Please read the following safety notice carefully before operating the compressor.
2.1 General Notices
-
Understand fully this installation and operating manual before operation.
-
The other person except authorized operator should not operate the pump
- When the pump is not properly working, it should be stopped immediately.
-
I.VA.CO.
shall have no liability for any accident and failure arising from no compliance with
instructions in this manual.
-
2.2 Warning labels and its explanation
Following warning labels are shown and attached on
ICP
series compressors.
2.2.1 Read and Understand a manual:
Read and understand operator
’s manual before using this machine
2.2.2 Burn Hazard:
Hot surface. Do not touch.
2.2.3 Loud noise Hazard
Loud noise hazard. Ear protection must be worn.
2.2.4 Hazardous Voltage:
Disconnect power before opening. Contact causes severe electrical shock
.
.
2.3 Location of the labels
The labels of 2.2.1 Read and Understand a manual, 2.2.2 Burn Hazard, and 2.2.3 Loud noise Hazard
shall be shown on the top of sound shield of compressor.
The label of 2.2.4 Hazardous Voltage shall be shown on the cover of motor
’s terminal box