GTLT2 USER MANUAL,
www.i-trac.cn
Page 19 of 21
Cut/recover car engine
900****
901****
902****
903****
9000000
9010000
9020000
9030000
Remarks: You need to connect a relay to cut/recover car engine.
1.Cut Car Engine
900**** is the command to cut car engine.
901**** is the command to double confirm cutting car engine.
2.Recover car engine
902**** is the command to recover car engine.
903**** is the command to double confirm recovering car engine.
Set Geo-fence Alarm
003****E/Wdddmm.mmmmN/Sdd.m
mmmRzzz.z
0030000E11406.0024N2233.4230R0.5
When the tracker moves out of a preset square scope, it will send an SMS alarm to the authorized phone number for SOS.
Description:
1.E represents East Longitude, W represents West Longitude; N Represents North Latitude, S Represents South Latitude.
Edddmm.mmmm is the Longitude in the unit of degree and minute (ddd is the degree, mm.mmmm is the minute)
Ndddmm.mmmm is the Latitude in the unit of degree and minute (ddd is the degree, mm.mmmm is the minute)
2.zzz.z is the radius from 0.1KM to 999.9KM.
3.After set successfully, the GTLT2 will reply: SET GEO-FENCE OK
Turn on/off geo-fence
210****
211****
2100000
2110000
The default geo fence is Turn on
1.210****: Turn off geo fence alarm
2. 211****: Turn on geo fence alarm
Turn on/off GPS Module
222****
333****
2220000
3330000
The default GPS is Turn on
1.222****: Turn on GPS module
2. 333****: Turn off GPS module
Presetting by SMS for GPRS tracking (Ensure that your SIM card supports GPRS connection prior to setting)
Change Service Password on GPRS
mode
802****+New Service POld
Service Password
802000012340000
Remarks: The password will be changed from 0000 to 1234
Enable GPRS
710**** 7100000
The command to switch to GPRS mode.
