I-Tech LA500, User Manual

Page: 4 / 21

MNPG127-02 Pag. 4
USER MANUAL
This manual is addressed to:
- machine user;
- owner;
- managers;
- handling personnel;
- installers;
- users;
- maintenance personnel.
It contains general information on the operation, precautionary practices, and
maintenance information of the device I-TECH LA500.
This is an essential reference guide for users. It is essential to read the manual
carefully before installing and using the device and to keep it at hand for quick
reference.
The manufacturer declines all responsibility for:
- improper use of the machine;
- use contrary to specific national laws;
- incorrect installation;
- defective power supply;
- improper maintenance;
- unauthorised modifications and interventions;
- use of material or spare parts that are not specific for the model;
- partial or complete non-observance of the instructions supplied;
- exceptional events.
To get further information, consult the fabricant.
WRITING CONVENTIONS
Certain sections of the manual have been underlined in order to highlight their
importance.
NOTE
These contain important information and useful tips for operating the equipment.
CAUTIONS
The CAUTION message appears before operations, which, if not correctly performed,
may cause damage to the machine and/or its accessories.
! WARNING !
This signals operations or situations, which, if unknown to the operator, or incorrectly
carried out, may harm the operator.
WARRANTY
IACER srl guarantees the quality of its products for a period of 24 months from the
date of purchase, when information contained in this manual regarding installation,
use and maintenance is strictly adhered. For professional user warranty is for a period
of 12 months from the date of purchase.
During the warranty period the faulty parts will be replaced or repaired according to
company discretion.
The warranty does not however, include the replacement of the equipment.
The warranty does not cover damages resulting from:
- incorrect connection and installation;
- incorrect use due to non-compliance with instructions contained in this manual;
- improper or inadequate maintenance;
- use of the machine in environmental conditions which do not conform with those
specified for the product;
- unauthorized opening of the outer casing;
- tampering or unauthorized modifications;