I-Tech Black Hawk BHK-115-8e, User Manual

Page: 21 / 39

21
BHK Series Manual
www.i-techcompany.com
Step 5
Repeat step 2 to 4 for the remainder of the computers.
Step 6
Attach the power supply to the BHK-115-8e/117-8e unit and plug the other end into an electrical
receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep.
Usage
The power on state of 8-port BHK-115-8e/117-8e:
When you power on the BHK-115-8e/117-8e, it will ask you for the password, the default
password value is eight zero –“ 00000000 “ . Please key in eight zero and enter the same
value at retype field.
Note: If you are not familiar with the operation of OSD menu, please don’t change the
password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the
password and unfortunately forget the password, you need send it back to your distributor for
maintaining the password.
7-Segment LED Indication :
When you select one of eight PC ports and this PC is shut down or this PC port is disconnected
to the PC, the selected port LED will flash. When you select one of eight PCs ports and this PC
is powered on, the selected port LED is lit.
BHK-115-8e/117-8e
1 2 3 4 5 6 7 8
Keyboard Hot Key Commands:
Yond BHK-115-8e/117-8e by switching ports through simple key sequences. To send
commands to the BHK-115-8e/117-8e,
the “SCROLL LOCK” key must be pressed twice
within 2 seconds. You will hear a beep for confirmation and the keyboard is in hot key mode. If
you have not pressed any key in hot key mode within 2 seconds, the keyboard will go back to
normal Operation System control state.
Below are the different hot key commands:
within 2 seconds
+ + = Previous Channel
Scroll
Lock Scroll
Lock
↑
Scroll
Lock Scroll
Lock
↓