3
4
Charging Your Headset
The headset comes with a built-in rechargeable battery. Prior to using the headset for the first
time, it is recommended to fully charge the battery first.
Fig.2
Charger
Fig.3
Charging
Socket
Charger Plug
Insert the charger plug into the headset’s charging socket (refer to Figure 3) and plug the mains
charger to an AC wall outlet. The light on the Arrow Lite (status indicator) will stay red during
charging.
IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used
for a long time or the battery is drained.
Normal Charging Time
It takes about three hours to fully charge the battery. When the battery is fully charged, the status
indicator will turn blue and remain on. Unplug the mains charger from the AC wall outlet and the
charger plug from the headset. Press and hold the MFB (refer to Figure 1) for two seconds to turn
on the headset. Please refer to “Turning Your Headset On and Off” for further details.
Talk and Standby Time
A fully charged battery can offer up to 12 hours of talk time and up to 180 hours of standby time.
When there are no calls the headset should remain turned on in standby mode.
Battery Low Indication
When the battery has become low when the headset is on, the status indicator will flash red and
the headset will emit a beep* every minute. Please follow the instructions described above to
recharge the battery.
*If you are pairing your headset and your mobile phone in a noisy environment, we advise you to
put on the earphone first so that the beep will be more audible.
Turning Your Headset On and Off
Turning On the Headset
Press and hold the MFB (see Figure 1) for two seconds until you hear a short beep. The status
indicator will then flash blue.
IMPORTANT: Press the MFB again when you want to turn on the headset to re-activate pairing and
ensure the connection between the headset and the mobile phone is resumed. For pairing, please
refer to “Pairing Your Headset” on page 8 of this user guide.
Turning Off the Headset
Press and hold the MFB for two seconds until you hear a long beep. The status indicator will turn
red and the headset will turn off.
IMPORTANT: To disconnect the Bluetooth connection, press the headset’s MFB firmly to turn it off.
If you will not be using the headset for a while, we advise you turn off the Bluetooth function on
your mobile phone as well.
