- 8 -
INITIAL SET UP
Set the i-mop in the “Park” position.
For the initial setup or anytime the squeegee is not
installed: pull the hose back up from the top while
guiding the lower half back into the i-mop to make
sure the vacuum hose will not be crimped during the
following procedure.
Move the upper body of the i-mop into the upright
vertical position.
Crouch down and while holding the handle with one
hand; hold the scrub deck with your other hand.
Lift up the scrub deck slowly until it’s standing
upright on the front wheels; guide the body towards
the scrub deck until it snaps into a resting position.
Please ensure that the i-mop is parked in a place
where nobody can bump into it. We recommend
always parking the i-mop close to a wall with the
handle pointing towards the wall and the brushes
facing away from the wall. This will ensure that the
i-mop leans against the wall if it is bumped.