- 17 -
How to Replace the Squeegee
With the i-mop in the “Park” position, hold the scrub deck with one hand while pulling the left side of
the squeegee off with the other hand. Switch hands afterwards and repeat for the right side. Detach the
vacuum hose by twisting a 1/4 turn at the connector until the squeegee is loosened. Inspect the hose
before you continue to install the new squeegee.
How to Switch or Replace the Squeegee Blades
Unscrew the 8 plastic nuts and take off the squeegee rear plate. Once the plastic part is removed, you
can easily take off the front rubber blade. Push through the 8 screws in order to remove the squeegee
front plate. Now you can also switch or replace the rear rubber blade. To assemble the squeegee again,
reverse the previous instructions.
How to Replace the Vacuum Hose
After you detach the squeegee as written above and have removed the Solution Tank, you can see where
the vacuum hose is connected at the i-mop handle. Hold the scrub deck with one hand, while detaching
the vacuum hose by twisting a 1/4 turn at the connector until the squeegee is loosened. Now you can
carefully pull the vacuum hose out of the machine.
Guide the new vacuum hose via the opening to the hose connector located at the i-mop handle.
Connect them by twisting the hose a 1/4 turn at the connector until they have lined up, and reinstall
the squeegee.