i-team i-mop Lite User Manual Download Page 5 | Manualshive

Page: 5 / 43

i-team i-mop Lite User Manual Download Page 5

5

R eading guide

The following symbols and terms are used throughout this manual to alert the reader to
safety issues and important information:

Symbol Term

Explanation

WARNING

Indicates a hazardous situation which, if the safety
instructions are not followed, can lead to injuries of
the operator or bystanders and light and/or
moderate damage to the product or the
environment.

CAUTION

Indicates a hazardous situation which, if the safety
instructions are not followed, can lead to light and /
or moderate damage to the product or the
environment.

ATTENTION

Indicates a liability situation, where the
manufacturer or its partners and affiliates cannot be
held accountable for damages caused by non-
compliance.

STRONG MAGNET

Indicates that the machine contains strong magnets.
These can cause pacemakers to stop working or
cause electronic data to be damaged, such as
information stored on access passes.

PACEMAKER

Indicates that operators and maintenance crew
wearing pacemakers should keep a minimal
distance of 6 in / 15 cm. In this specific case
operators may not use the machine as a backpack.

BATTERIES

Indicates a battery-operated machine, batteries
must be charged according to the instructions in the
separate class I battery charger user manual.
Batteries must be disposed of according to your
local laws and regulations.

SLIPPERY
SURFACE

Indicates that the machine can cause floors to
become slippery. In the workplace, it is advised to
place slippery surface signs in these areas.

«
...
3
4
5
6
7
...
»

Summary of Contents for i-mop Lite












































Reviews:

No comments