19
5.2.
Assembly
5.2.1
Charging the battery
Charge the battery according to the instructions in the battery charger manual. Make sure the
battery is charged regularly.
5.2.2
Attaching the brushes
Figure 9
To attach the brushes:
1.
Put the imop
®
Lite in store position, see section 4.2.
2.
Hold the scrub deck firmly with one hand.
3.
Align the left brush (Figure 9, pos 1) with the left motor disk (Figure 9, pos 2). Align the
latches and cut-outs in the brush and motor disk.
4.
Push the brush on the motor disk.
5.
Turn the left brush clockwise until you see the motor disk turning. The brush is now in
place.
6.
Align the right brush with the right motor disk. Align the latches and cut-outs in the brush
and motor disk.
7.
Push the brush on the motor disk.
8.
Turn the right brush anticlockwise until you see the motor disk turning. The brush is now
in place.
