32
7.
Maintenance
CAUTION
Remove the battery before executing any cleaning or maintenance task.
CAUTION
Always keep the body of the imop
®
Lite in an upright position when replacing the
brushes or the squeegee.
7.1.
Brush replacement
Figure 25
The brushes are attached to the scrub deck with a bayonet fitting.
1.
Put the imop Lite in store position, see section 4.2.
2.
Hold the scrub deck firmly with one hand.
3.
Using your other hand to turn the left brush (Figure 25, pos 1) anticlockwise until you feel
resistance or see the motor disk turning as well.
4.
Pull the brush towards you, off the motor disk.
5.
Turn the right brush clockwise until you feel resistance or see the motor disk turning as
well.
6.
Pull the brush towards you, off the motor disk.
7.
Visually inspect the motor disks.
8.
Clean the imop Lite scrub deck with a clean, dry cloth before you install the brushes.
