i-Stor - RAID User Guide
Page 2 / Chapter 1 - Introduction
i-Stor RAID - Detailed View
Front View
1. ON/OFF switch (blue when ON)
2. LED indication for hard drives
(green for data access, red for error)
and RAID rebuild function
(yellow or green during rebuild)
3. Ventilation holes
Note: To turn on the power, press the ON/OFF switch and release it. To turn it off, press
the ON/OFF switch, hold it for 3 seconds and then release it again.
Rear View
1. Switch for RAID setting
2. Fan for ventilation
3. FireWire 400 port
4. FireWire 800 ports
5. USB 2.0 port
6. Power receptacle
RAID Setting
Non-RAID
RAID 0 - Striping
1 = Up, 2 = Up
1 = Down, 2 = Up
RAID 1 - Mirroring
RAID
0
-
Spanning
1 = Down, 2 = Down
1 = Up, 2 = Down
Note: Changing the RAID setup will require you to re-format the drives. Make sure you
backup all data before doing so!
1
2
3
1
2
3
5
6
4
