i-SENS VetMate, User Manual

Page: 8 / 52

12 www.i-sens.com www.i-sens.com 13
VetMate Blood Glucose Meter
Data Port
Used to transfer data
from the meter to
a computer with
a cable
▲
Button
Selects or changes
information
Display
Shows results,
messages
Ejection Button
Slide down to
discard the used
test strips
Test Strip Port
Insert test strip here
▼
Button
Selects or
changes
information
S Button
Turns the meter on/
off and confirms
menu selections
Note:
• The cable for data management software can be ordered
separately. Please contact Customer Service: 1-800-429-
5001 Mon–Sat, 9 am–9 pm EST.
• The unit of measurement is fixed and it cannot be changed
by the user.
VetMate Blood Glucose Meter Display
Display Segment Check
It is recommended to check if the display screen on the meter
matches the illustration below every time the meter turns on.
Do not use the meter if the display screen does not exactly
match the illustration as the meter may show incorrect results.
mem
Appears when test
results stored in
the memory are
displayed
alarm
Appears when the
time alarm has been
set
Hypoglycemia
symbol
Appears when
the test result is
below the pre-set
hypoglycemic level
Mute symbol
Appears only when
the sound is set to
OFF
Battery symbol
Indicates meter
battery is running
low and needs to
be replaced
check
Appears when the
control solution test
results are saved or
displayed
Test results
Blood insertion
symbol
Indicates the meter
is ready for the
application of a drop
of blood or control
solution
Month Day Hour Minute
Animal symbol
Shows the set
animal (dog/cat)
mode, Can be
changed in SET mode
or immediately prior
to blood insertion