i-SENS GM505PAD User Manual Download

Page: 24 / 25

48 www.i-sens.com

www.i-sens.com 49

Warranty Information

Manufacturer’s Warranty

i-SENS, Inc. warrants that the CareSens N Meter shall be free

of defects in material and workmanship in normal use for a

period of five (5) years. The meter must have been subjected to

normal use. The warranty does not cover improper handling,

tampering, use, or service of the meter. Any claim must be

made within the warranty period.
The i-SENS company will, at its discretion, repair or replace a

defective meter or meter part that is covered by this warranty.

As a matter of warranty policy, i-SENS will not reimburse the

consumer’s purchase price.

Obtaining Warranty Service

To obtain warranty service, you must return the defective

meter or meter part along with proof of purchase to your

nearest i-SENS authorised Warranty Station.

MEMO

Summary of Contents for GM505PAD


























Search results

Summary of Contents for GM505PAD

Reviews:

Related manuals for GM505PAD

Brands by name

Popular brands

i-SENS GM505PAD, User Manual

Search results

Summary of Contents for GM505PAD

Reviews:

Related manuals for GM505PAD

Brands by name

Popular brands