i-SENS GM505PAD User Manual Download

Page: 20 / 25

40 www.i-sens.com

www.i-sens.com 41

Step 4
On pressing , the number indicating the

minute will start blinking. Press to set the

minute.

Step 5
Press the S button to finish and to go to the

‘alarm 2’ mode.

Repeat steps 2 to 5 to set the remaining

time alarms (alarm 2-3).

Step 6
Press the S button for 3 seconds to finish

and turn the meter off.

Message

What It Means

A used test strip

was inserted.

The temperature

during the test was

above or below the

operating range.

What To Do

Repeat the test with a

new test strip.

Move to an area where

the temperature is

within the operating

range (5-50˚C/41-

122˚F) and repeat the

test after the meter and

test strips have reached

a temperature

within the operating

range.

Understanding Error Messages

The blood or control

solution sample was

applied before the

symbol

appeared.

Repeat the test with a

new test strip and

wait until the

symbol appears

before applying the

blood or control

solution sample.

Summary of Contents for GM505PAD


























Search results

Summary of Contents for GM505PAD

Reviews:

Related manuals for GM505PAD

Brands by name

Popular brands

i-SENS GM505PAD, User Manual

Search results

Summary of Contents for GM505PAD

Reviews:

Related manuals for GM505PAD

Brands by name

Popular brands