26 www.i-sens.com
www.i-sens.com 27
Caution:
To avoid infection when drawing a sample, do not use a
lancet more than once, and:
• Do not use a lancet that has been used by others.
• Always use a new sterile lancet.
• Keep the lancing device clean.
Note:
Repeated puncturing at the same sample site may cause pain
or skin calluses (thick hard skin). Choose a different
site each time you test.
Using the Lancing Device
You will need a lancing device in order to collect a blood
sample.
You may use the lancing device that is included in the CareSens
PRO Blood Glucose Monitoring System or any other medically
approved lancing device.
• The lancing device is for use by a single user only and should
not be shared with anyone.
• Use a soft cloth or tissue to wipe the lancing device. If
necessary, a small amount of alcohol on a soft cloth or tissue
may be used.
Adjustable Tip
Lancet Holder
Sliding Barrel
Release Button
Load Confirmation
Window
Ejection System
Lancet
Step 1
Wash hands and sample site with
soap and warm water. Rinse and dry
thoroughly.
Step 2
Unscrew and remove the
lancing device tip.
Step 3
Firmly insert a new lancet into the
lancet holder. Hold the lancet firmly.
Gently twist to pull off protective disk.
Save disk to recap lancet after use.
Replace lancing device tip.
Step 4
Turn the adjustable tip until it is aligned
with the load confirmation window and
release button as shown in the diagram.
Preparing the Lancing Device
