10
www.i-sens.com
www.i-sens.com
11
The CareSens N Premier meter uses two 3.0 V lithium batteries.
Before using the meter, check the battery compartment and
insert batteries if empty.
When the
symbol appears on the display while the meter
is in use, the batteries should be replaced as soon as possible.
The test results may not be saved if the batteries run out.
Inserting or Replacing the Batteries
Step 1
Make sure the meter is turned off. Push the
cover in the direction of the arrow to open
the battery compartment.
Step 2
Remove the used batteries one at a time.
Slip your index finger under the battery to
lift and pull out as shown. Insert two new
batteries with the + side facing up and
make sure the batteries are inserted firmly.
Step 3
Place the cover on the battery
compartment. Push it down until you hear
the tab click into place.
Caring for Your System
Use a soft cloth or tissue to wipe the meter exterior. If necessary,
dip the soft cloth or tissue in a small amount of alcohol.
Do not use organic solvents such as benzene or acetone, or
household and industrial cleaners that may cause irreparable
damage to the meter.
Caution:
t
Do not expose the meter to direct sunlight, heat, or excessive
humidity for an extended period of time.
t
Do not let dirt, dust, blood, or water enter into the meter’s test
strip port.
t
Do not drop the meter or submit it to strong shock.
t
Do not try to fix or alter the meter in any way.
t
Strong electromagnetic radiation may interfere with the
proper operation of this device. Keep the device away from
sources of strong electromagnetic radiation, especially when
measuring your blood glucose.
t
Store all the meter components in the carrying case to
prevent loss and help keep the meter clean.
Note:
Removing the meter batteries will not affect your stored
results. However you may need to reset your meter
settings. See page 16.
Summary of Contents for CareSens N Premier
Page 30: ...60 www i sens com MEMO...
