36
www.i-sens.com
www.i-sens.com
37
Step 11
You can attach a flag to a result to indicate particular situations
while the strip is still in the meter. When the result is displayed
right after a test, press the
◀
or
▶
button to select a pre-meal
flag ( ), a post-meal flag( ), a fasting flag( ), or a control
solution flag( ). When you remove the test strip while the
desired flag is blinking, the test result is stored with the flag.
If you do not want to add any flags on the test result, remove
the strip after the test result is displayed.
No flag
Pre-meal flag
Post-meal flag
Fasting flag
Control solution flag
Note:
To transmit glucose data with Bluetooth
function,
t
The Bluetooth function on the meter must be
turned On,
t
The meter and a smartphone must be paired,
t
The SmartLog mobile app must be launched.
The meter will transmit data in the following cases,
t
When the strip is ejected after measuring,
t
When the meter is turned on (only when untransmitted data
exists).
Step 10
Apply the blood sample to the narrow end of the test strip until
you hear a ‘beep’. At this time, the display segments will rotate
clockwise while the blood is going in.
The test result will appear after the meter counts down from 5 to
1. The result will be automatically stored in the meter’s memory.
If the test strip is removed after the test result is displayed, the
meter will automatically switch off after 3 seconds. Discard
used test strips safely in disposable containers. If the Bluetooth
feature is enabled, the meter will send the test result to the
connected smartphone.
Test result
Summary of Contents for CareSens N Premier
Page 30: ...60 www i sens com MEMO...
