24
www.i-sens.com
www.i-sens.com
25
Setting the Strip Expiration Date Indicator
Step 1
Entering the Expiration Date Setting
Press and hold the
◀
and
▶
buttons at the same time for 3
seconds to enter the expiration date settings. After all segments
flash across the screen, 'EP' will show up.
Step 2
Setting the Year
A number indicating the year will blink in the
left corner of the screen. Press the
◀
or
▶
button until the correct year appears.
Press the
S
button to confirm the year and set
the month.
Note:
The strip expiration date is printed on the test strip vial.
Step 3
Setting the Month
A number indicating the month will blink at
the bottom of the screen. Press the
◀
or
▶
button until the correct month appears. After
setting, press and hold the
S
button for 3
seconds to turn off the meter.
Step 12
This mode allows you to turn the hypoglycemia indicator
(possible low blood sugar) On or OFF and to select the desired
level for the indicator. You will be alerted any time your test
result is lower than the selected level. On pressing the
◀
or
▶
button, the screen will display 'On' or 'OFF'. Press the
S
button
when 'On' appears to enter the setting. Press the
◀
or
▶
button
until the desired hypoglycemia level between 20 and 90 mg/dL
(1.1~5.0 mmol/L) appears. Then, press the
S
button to confirm
the level and to return to step 2. See Page 17.
Turning on the Hypoglycemia (HYPo) Indicator
Caution:
Ask your healthcare professional to help you decide what your
hypoglycemia level is before setting your level.
Note:
If the test result is lower than
the pre-set hypoglycemia
level, the meter will display
the following.
HYPo
warning
will blink
on the left
bottom
corner.
Summary of Contents for CareSens N Premier
Page 30: ...60 www i sens com MEMO...