・Increasing the maximum exposure time increases blurs.
・[Image quality] in the multi part live image page>[Maximum shutter] cannot be set
when [Common(Cam. 1-2)] is selected in [Camera selection]. To configure
[Maximum shutter], select anything other than [Common(Cam. 1-2)].
Maximum shutter: 1/30
Maximum shutter: 4/30
Set [Super Dynamic] to [Off] when the following phenomena are observed depending
on the lighting condition.
–If flicker or color change occurs
–Noise in bright areas on the screen
Super Dynamic: Off
Superdynamic:
On-crlf-Level: 28
quality.
(1) Select [Maximum shutter] of [Light control mode]
・
Selecting [Maximum shutter] longer than [Max. 1/30s] brightens the image because the
amount of light entering increases.
9.8
Reduce white flickering and blacking on the screen
9.8.1
Set Super Dynamic
When Super Dynamic is set to ON, both bright and dark areas are reproduced faithfully, even
when shooting in a place with a large brightness difference.
➣
Live image page setup panel>Clicking the [Image quality] tab enables you to set the image
quality.
(1) Set [Super Dynamic] to [On]
9. Other
9.8 Reduce white flickering and blacking on the screen
42
