8
【
1
】
RJ45 Network terminal
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the network terminal.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply,
12 V DC will be used for power supply.
•
When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
Parts and functions
Terminals
【
5
】
【
3
】 【
4
】
【
1
】
【
2
】
【
1
】
RJ45 Network terminal
【
2
】
Power supply terminal
(12 V DC)/ Power cord plug (accessory)
【
3
】
Audio input terminal
【
4
】
Audio output terminal
【
5
】
EXT I/O terminals/ EXT I/O terminal plug
(accessory)
【
6
】
MONITOR OUT terminal
(factory shipment: NTSC monitor)
The illustration shows the camera with power cord plug and EXT
I/O terminal plug attached to it.
