9
Step 3
Be careful to the following when replacing
the dome cover:
- The waterproof rubber (Sealing Packing) may
come off simultaneously. Attach the waterproof
rubber to the original position before attaching
this product.
- It is recommended to check whether the
waterproof rubber is deteriorated. When it has
deteriorated, the waterproof performance will
decrease, so consider repairing it.
Dome cover holding plate
Waterproof rubber
(sealing packing)
This product
②
This product
①
Protrusion
(12 places)
• When replacing the dome cover,
remove the protection film covering
outside this product. After replacement,
attach the protection film back to the
outside this product. (Handle the new
dome cover with care not to scratch
inside and outside.)
Summary of Contents for WV-QDC504C
