ISH INLINE CONNECTOR Instruction Manual
Document No.
HDM-0006
18
/
22
Confidential C
Notes
①
Do not pry with the releasing jig or terminals during operation. Check for any deformation or damage on the terminals and the housing after
releasing the terminals.
②
Do not continue applying force once the lance has reached the ceiling. This could cause deformation to the ceiling, damage or deformation to
the releasing jig or terminals. Take sufficient care when handling.
(see Fig.36)
③
If there is any damage or deformation on the terminal or the housing, do not use the damaged item.
Replace the item with a new one.
④
Only use the terminal releasing jig specified.
⑤
Care must be taken not to damage edge of the jig (e.g. from dropping, etc.)
Fig34.Correct orientation of the releasing jig and the housing lance
Fig 35.Terminal releasing jig in operation
Fig.36. Deformed ceiling, Damaged releasing jig
Terminal releasing jig
Direction of release
Pivot of releasing jig
Terminal releasing jig
Deformed ceiling
Damaged releasing jig
Excessive rotation
