INO_Factory-Link-SPE-M_User_Manual_V1.0.docx
2022-09-10
9 / 12
7
Software
The graphical user interface is intended for remote monitoring. It can also be used for testing and
development purposes as it provides direct access to the register sets of the integrated PHYs. It
provides the following functions:
Controller
100BASE-T1 connection
100BASE-TX connection
•
Media Converter Selection
•
Firmware Information
•
Device Reset
•
Link Status Monitoring
•
Signal Quality Indicator (SQI)
Monitoring
•
Cable Diagnostics
•
Read/Write Access to PHY
registers
•
Link Status Monitoring
•
Read/Write Access to PHY
registers
