INO_Factory-Link-SPE-M_User_Manual_V1.0.docx
2022-09-10
4 / 12
1
Introduction
The Factory-Link-SPE-M connects 100BASE-T1 with 100BASE-TX networks. With an inductive T1
frontend, chassis grounding, and extra ESD protection of the network links, it is designed for industrial
environments. The IEC 63171-6 compliant T1-connector makes it a plug-and-play solution for
industrial Single Pair Ethernet. Its proprietary automatic master/slave detection eases the T1 link
configuration. Master/slave role can also be set manually using a DIP switch. The wide power supply
range from 5V to 28V allows a hassle-free installation in various environments. When used with a PC,
it can solely be powered via USB. The Control Center software connects via the USB-C interface to
the Factory-Link-SPE-M and provides information about link state and signal quality and allows direct
PHY register access. Faults in the T1 connection can be detected using the Signal Quality Indicator
and the Cable Diagnostics function allowing shortcut, open connection, and fault distance detection.
