EMS i-MO 200-S Series Hardware Installation Guide
Version
2.0
ELECTRONIC MEDIA SERVICES LIMITED
PASSFIELD BUSINESS CENTRE, LYNCHBOROUGH ROAD, LIPHOOK, HAMPSHIRE, GU30 7SB, UK
Tel:
01428 751655 |
Fax:
01428 751654 |
E-mail:
Page
10
of
20
4) How to close the appliance (optional)
Step
1
- Position the panel as shown in image
2
below, and carefully insert the panel into the slots of the
case as shown in images
3
,
4
and
5
below. The panel should slide in easily. DO NOT FORCE!
Step
2
- Slide the panel into the case until it is fully inserted as shown in image
6
above.
Gently
(by hand)
insert the back panel screws in the holes and hand tighten. The case is made from aluminium so it is fragile.
Once the screws have been tightened by hand you should use a screwdriver just to tighten a bit more as
shown in image
7
above.
Do not over tighten!
5) How to attach the WiFi antenna
The i-MO appliance is supplied with a WiFi interface. This can be enabled on request at time of order. If the
WiFi interface is enabled install the WiFi antenna on the WiFi aerial connector next to the USB port as
shown below. Fold the aerial and turn it so the aerial is pointing upwards as shown below.
Note
:
Connectors should be touch tight only! Do not over tighten.
