I+ME ACTIA I+ME ACTIA NetPorty II, User Manual

Page: 22 / 50

Installation
Installing the Software
Version 1.03
2-4
2.3 Installing the Software
2.3.1 If you start at serial port
Driver installation:
1
Insert the CD. The setup programm will start
automatic, if not please start the program
“START.EXE” in root path.
2 Go to "Software Installation"
3 Choose your operating system, is important .
4 Choose your hardware component at the selection
box then press "Start Installation". If the file is started
(*.com file), follow the steps on the screen. If
necessay type in the password.
5 If password is correct software will be installed
successful.
Application installation:
1
Insert the CD. The setup programm will start
automatic, if not please start the program
“START.EXE” in root path.
2 Go to "Software Installation"
3 Choose your operating system, is important .
4 Choose PcCANControl component at the selection
box then press "Start Installation". If the file is started
(*.com file), follow the steps on the screen. If
necessay type in the password.
5 Start PcCANControl, select “create a new project”
and the
NetPorty II hardware, at this case “Porty2-
COM1” or “Porty2-COM2”. After the selection the
necessary
NetPorty II software is activated on your
PC. For further information see also chapter about
PcCANControl.
It is not necessary to install a driver. The software works
with the standard Win32 serial communication services
with 115200bps, 8 bits, no parity, 1 stop bit.