i-mate PM10A, User Manual

Page: 142 / 200

Pocket PC Phone User Manual 142 Pocket PC Phone User Manual 143
The fax device of the receiver will show the Station ID as the sender number.
Properties:
1. Tap the Start menu > Programs > Truefax > Tools > Properties... .In Logo graphic , you can tap
the File button to choose a bitmap that will be used as a logo representing the sender on
the cover page.
2. Units option enable you to choose the unit you are most familiar with. You can specify
inch or cm (centimetre).
3. The last and bottom part of the properties dialog is for the Fax Viewer customization. In
the properties dialog you can customize the Fax Viewer by selecting:
n
 Text size : Enlarge the text font when viewing the document.
n
Caption word break : make the text break if it does not fit into a single line.
n
Keep graphics of sent faxes feature: faxes that were already will not be
saved.Assigning every fax a subject should better help you to identify your
sent faxes without storing the fax documents.
4. Tap OK to save the new settings.
Layout
You can customize the appearance of your fax by modifying the settings in the Layout
dialog.
Tap the Start menu > Programs > Truefax > Tool > Layout .
n
In the Font tab, define the font that will be used for the fax. The only text that won’t be
shown with this font is the text you have written with the quick note feature of the fax
viewer, because this text will be handled as a graphic.
n
The Margins tab shows the actual height and width of the margins used for the fax.
Modify these values by choosing one of the given values from the list. The standard
measurement unit can be set in the Properties options.