6.3. Parallel Installation
A. Put the battery module in the cabinet and connect the cable
(1) Put the battery in the cabinet.
(2) Fix 4 PC screws.
(3) Connect the cable between the battery modules.
(4) The dialing address is pulled out to ensure that the soft switch of the power supply is
disconnected.
(5) Connect the cable to the inverter.
B. Power On
Double check all the power cable and communication cable.
(1) Switch power on
Switch on all the battery modules:
(2) The module with the dialing switch of 1 is the master battery module, and the other modules
are the slave battery module (one master battery module can be configured with up to 62 slave
battery modules). The inverter must communicate with the battery module with the address of 1
INSTALLATION
23
