COBALT Pro
™
Wall Sensor Activated
Concealed Flush Valve Installation Instructions
101929 : 3200 Series
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
page 5
Step 2
Lubricate tailpiece O-ring with water. Insert flush valve tailpiece
into control stop.
Step 3
Assemble vacuum breaker tube and spud escutcheon assemblies
as shown.
NOTE
: The vacuum breaker tube may need to be cut
to fit properly. If using scored vacuum breaker, always cut from
scored end and leave at least 1-1/4” (32mm) of scoring.
Step 4
Ensure flush valve is properly aligned with fixture and vacuum
breaker tube. Tighten connections by hand.
Step 5
Once properly aligned, tighten connections with a smooth jaw
wrench.
ProLAST
®
T-SEAL & FLUSH VALVE CAP
ASSEMBLY INSTALLATION
Step 1
Insert ProLAST® T-Seal into flush valve body.
Rev 080323
