©I.CH Motion® 2020
ichmo
.com
Specifications subject to change without notice.
Owner's Guide: 3P20M Hybrid Stepper Motor Driver
Page 10
TECHNICAL DOCUMENT
3.6
2.6
OFF
OFF
ON
OFF
4.0
2.9
ON
OFF
ON
OFF
4.5
3.2
OFF
ON
ON
OFF
4.9
3.5
ON
ON
ON
OFF
5.3
3.8
OFF
OFF
OFF
ON
5.7
4.1
ON
OFF
OFF
ON
6.2
4.4
OFF
ON
OFF
ON
6.4
4.6
ON
ON
OFF
ON
6.9
4.9
OFF
OFF
ON
ON
7.3
5.2
ON
OFF
ON
ON
7.7
5.5
OFF
ON
ON
ON
8.3
5.9
ON
ON
ON
ON
Notes: Due to motor inductance, the actual current in the
coil may be smaller than the dynamic current
settings, particularly under high speed condition.
DIP Setting for Standstill Current
SW5 is used for this purpose. OFF meaning that the standstill current is set to be half of the selected dynamic current, and ON meaning that
standstill current is set to be the same as the selected dynamic current. The current automatically reduced to 60% of the selected dynamic current
0.5 second after the last pulse when use automatic idle-current reduction mode. Theoretically, this will reduce motor heating to 36% (due to
P=I2*R) of the original value.
