10
BALLAST
•
Remove the rear panel from the game. Unscrew the
ballast and unplug the wire harness. Replace the bal-
last “.
•
REPLACEMENT BALLAST: SX8449X
STOPLIGHT OPTO SENSOR
•
Remove the rear panel from the game. Remove the
“coin chute elbow” from the score wheel panel, to re-
place the Opto sensor that is not working.
•
Unplug the harness from the Opto Sensor PC Board.
Remove the 2 screws that attach the sensor bracket
to the wheel panel.
MAINTENANCE & TROUBLESHOOTING
•
Remove the Opto Sensor PC Board by unscrewing
the 2 white spacers. Replace the Opto Sensor PC
Board and reassemble in reverse order.
•
REPLACEMENT OPTO SENSOR PC BOARD:
RB2009AX
VAULT DOOR SWITCHES
•
Remove the rear panel from the game. Unplug the
wire harness from the switch. Unscrew the switches
and replace.
•
REPLACEMENT SWITCH: 211
VAULT DOOR “O” RING
•
Remove the rear panel from the game. Cut the 2 wire
ties that secure the “O” ring to the vault doors.
(
NOTE:
one vault door is attached to the “O” ring from
one side of the “O” ring and the other vault door is
attached to the other side of the “O” ring. After the “O”
ring is replaced, the vault doors
MUST
be attached in
the same manner) Remove the “O” ring and replace.
Re-attach the “O” ring to the vault doors with new wire
ties.
•
REPLACEMENT “O” RING: SX4001
