manualshive.com logo in svg

I-bus/Phoenix stingray ii+, User Manual, Page: 53 / 90

Share
Download
I-bus/Phoenix stingray ii+ User Manual Download Page 53

Chapter 4 - AWARD BIOS Setup

Stingray II+ User's Guide

4-19

Power Management

This category determines the power consumption of the system after seĆ

lecting the below items.  Default value is Disable.  The following pages

tell you the options of each item & describe the meaning of each option.

Item

Options

Descriptions

A.Power Management

1.  Disable

Global Power Management will be

disabled

2.  User Define

Users can configure their own power

management

3.  Min Saving

Pre-defined timer values are used such

that all timers are in their MAX value

4.  Max Saving

Pre-defined timer values are used such

that all timers  MIN value

B. Video Off Option

1. Always On

System BIOS will never turn off the

screen

2. Suspend->Off Screen off when system is in

SUSPEND mode

3. Susp,

stby->Off

Screen off when system is in

STANDBY or SUSPEND mode

4. All Modes

->Off

Screen off when system is in DOZE,

STANDBY or SUSPEND mode

C.  Video Off Method

1.  Blank Screen The system BIOS will only blanks off

the screen when disabling video

2.  V/H SYN

C+Blank

In addition to (1), BIOS will also turn off

the        V-SYNC & H-SYNC signals

from VGA cards to monitor

3.  DPMS

Supported

This function is enabled for only the

VGA card supporting DPMS

Note:  Green monitors detect the V/H

SYNC signals to turn off its electron

gun

Summary of Contents for stingray ii+



























































































Reviews:

No comments