ENG
ENG - 13
•
Put the laundries separately.
•
Ensure that no laundry is stuck between the cover and bellow seal when closing the door of
your machine.
•
Push the door of your machine until hearing the locking sound to close it.
•
Close the door of your machine properly, otherwise your machine will not start the washing
operation.
The amount of detergent you will put in your machine will depend on the following
criteria:
•
Your detergent utilization will be based on the degree of contamination of your laundries.
Do not prewash your less stained laundries and put your slight amount of detergent in the 2
nd
compartment of the detergent drawer.
•
For your much stained laundries, select a programme including prewashing, and put ¼ of the
detergent you will put in the detergent drawer in the 1
st
compartment of the detergent drawer
while putting the remaining ¾ of it into 2
nd
compartment.
•
Use detergents produced for automatic washing machine in your machine.
The amount of detergent you will use for your laundries is printed on the detergent package.
•
The higher the degree of hardness of the water the more detergent you will use.
•
The amount of the detergent you will use will increase as the amount of your laundries
increase.
•
Put the softener in the softener compartment in the detergent drawer.
Do not exceed the MAX level. Otherwise, softener will flow into washing water through
flushing.
•
Softeners with high density are required to be thinned to a degree before being put
in the drawer. Because high-density softener will clog the flush and avoid the flow
of the softener.
•
You can use your liquid detergents in all programs without prewashing.
For this, fit liquid detergent level plate in the accessories bag into 2
nd
compartment
of the detergent drawer and set the amount of liquid detergent according to the levels on this
plate. Remember to detach the liquid detergent plate.
