z
Support 16GB T-flash card.(maximum)
z
Build-in lithium battery
II Operation Guide
1. Charge
The battery is built-in lithium rechargeable battery, so when you use it the first time,
please charge firstly. The method for charging as following:
1.) Connect computer: use USB cable to connect the computer, then it can be
charged.
2.) Use adaptor: connect charger plug with USB cable, then plug into electrical
connector receptacle, it can be charged.
Notice: when battery power is not enough, Shorty Snap will enter into protection mode,
so it cannot be turn on. Now, please charge for it.
2. Power on to video
Please confirm the TF card has already insert products!
Press “ON/OFF” button, yellow indicator light begins to bright, now it enters into
standby mode. Holding the “VIDEO/CAMERA” button, yellow indicator light flashing
three times faster, and put out immediately. At this time, it begins to make a video.
press “ VIDEO/CAMERA” button yellow indicator light begins to bright, pause and
save
the
record. If
you
need
to
continue
to
video,
please
holding the
“VIDEO/CAMERA” again.
Notice:
a.
Please make sure T-flash (Micro SD) card has been inserted, if not, it will be
power off automatically after 15 seconds.
b.
The maximum capacity of T-flash card is 16GB.
c.
Saving file needs certain time, so please don’t press operation button
continuously in order to avoid saving unsmoothly and generating incomplete file.
d.
When you make a video, please focus on the object and keep 50cm under
sufficient illumination. Then the video will be right, natural color, clear and stable.
3. Take Photo
Press “ON/OFF” button, yellow indicator light begins to bright. Now it enters into
startup ready mode which can enter into standby mode. Press “VIDEO/CAMERA”
button. yellow indicator light flashing, represents a photo shoot. Repeated press,
repeat photo.
4
．
Power off
In the halted state, Holding “ON/OFF” button, then release till indicator goes out. Then
the machine is turned off.
