background image

8

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS

13

I110A01A-AAT

SHOP MANUAL

A Hyundai Shop Manual is available from your
authorized Hyundai dealer. It's written for pro-
fessional technicians, but is simple enough for
most mechanically-inclined owners to under-
stand.

SPARE TIRE AND TOOLS

I100A02E-AAT

Your Hyundai is delivered with the fol-
lowing:

Spare tire and wheel
Wheel nut wrench, Wrench bar
Jack

D060B01O

WARRANTIES FOR YOUR HYUNDAI
VEHICLE

I120A02A-AAT

o New vehicle 60 Months/60,000 Miles Limited

Warranty.

o New vehicle 120 Months/100,000 Miles Lim-

ited Powertrain Warranty (original owner
only).

o Anti-Perforation Limited Warranty
o Emission Defect Warranty - Federal Vehicle
o California Emission Control System War-

ranty (if applicable)

o Emission Performance Warranty Federal

vehicle

o Replacement Parts and Accessories Lim-

ited Warranty

NOTE:

Detailed warranty information is provided
in your Hyundai Owner's Handbook.

smhma-8.p65

5/25/2005, 2:28 PM

13

Summary of Contents for Santa Fe 2006

























































































































































































































































































Reviews: