S465D
Multi Function 2D/3D Wide Monitor
4/5
Problem
Possible solution
The power LED is an
orange color
LED Indicator can be orange color while changing video modes or Input
Signals.
Check the Resolution and the frequency on the video part of your
computer. Compare these values with the data in the Preset Timing
Table.
Picture turns on
slowly after power
is on
This symptom is not a malfunction. This delay is designed to prevent
the distorted and noisy picture when the power is on. However, if the
picture does not appear more than 5 minutes after the power is on, call
a service center.
Picture is OK but
sound does not
come out
Try to press volume up & down buttons of your remote.
Try to press the MUTE button of your remote.
One of the speakers
does not produce
sound.
Select sound balance and make proper adjustment. (Page 34)
Check the speaker connection cables.
Remote control
won't work.
Check whether there is a blocking object between the remote control
and monitor. Make sure your monitor is Power On. (Normally, the LED
on the front panel is red.) Check whether batteries are inserted with
proper pola, -). When the batteries are worn out, replace them.