
EN - 40
Select
Reset setting
and press
key, an option of Yes / No shall appear, press /down
to select “Yes” to return to factory default setting.
Press MENU key to exit the current interface.
Select the Exit to exit the main setting.
TROUBLESHOOTING
Symptom or Problem
Possible Cause/Solution
No power
The power connector is not completely inserted into the
unit.
Screen freezes
The unit may have malfunctioned. Switch it off and wait
for a few minutes before turning it on again.
Characters in display are incorrect Make sure that you have selected the correct language.
Unable to insert memory card or
USB device.
Memory card or USB device is not inserted correctly;
insert the card in the opposite side.
The unit cannot recognize the
memory device inserted.
1. Memory card or USB device is not inserted correctly.
2. The memory device may be damaged.
Please try a new device.
3. Make sure that you are using a memory card type,
which is supported by the unit.
4. Some unpopular memory cards or USB devices are
not compatible with the product. Use a memory card
or USB device, which matches with the Digital Photo
Frame.
5. It is slow to read the mass capacity memory device;
you should wait for a minute.
Note
: Not all USB storage devices or Memory cards can
be recognized for this digital photo frame.
There is a memory card or USB
device inserted in the unit, but the
photo frame is not able to read the
card or USB device.
1. Make sure that you are using a memory card or USB
device type, which is supported by the unit.
2. Make sure that the memory card or USB device is
inserted all the way into the correct slot.
3. The memory card or USB device is damaged.
SPECIFICATIONS
Display
Panel size: 17.75 CM (7”) Digital TFT LCD
Screen aspect ratio: 16:9
Resolution of the screen: 800 x 480 pixels
Power adaptor
Input: AC 100~240 V, 50/60Hz
Output: DC 5 V 1000 mA
USB port
USB Port 2.0 Supports most of the mass peripheral
USB device
Supported memory cards
SD™ (Secure Digital Card), MMC™ (Multimedia Card)
Supported picture format
JPEG only
Operating temperature
5 °C ~ 35 °C