EN
EN - 35
Connecting stand or put on wall
1. Pull the stand from the stand hole; place it on a stable and flat surface so that it stands up.
2. To put the digital photo frame on a wall, make sure you get a suitable hanger and fit the rear
wall mount hole on to it.
The installer must ensure that the stubs or nails on the walls can support a minimum 0.5 kg of
weight. Ensure that the hole to be drilled is slightly smaller than the diameter of the screw.
Make sure the screw is tightened into the wall with 11 mm of depth.
Fix stand
Put on wall mount hole
1.
2.
Connecting the power supply
1. Place the frame on a stable and flat surface.
2. Plug the DC plug of the adaptor to the DC in 5 V on the side of the di
-
gital photo frame, and then connect power adaptor to an available AC
100V-240 V 50/60Hz mains outlet, the player will then automatically
power on. the player will then automatically power on.
3. Press the
button to power ON/OFF.
4. When the unit is not being used for a long time, press the
button
on the unit to power it off again and unplug the AC adaptor from mains
outlet.
Connecting a USB device
You can view the pictures from the USB memory device by connecting it to the
frame
Note
: Not all USB storage devices can be read in this digital photo frame.
Inserting memory cards (FAT 32 Format)
To view the pictures from a compatible memory card, insert it into the
respective card slot in the Digital Photo Frame.
This Digital Photo Frame is compatible with the following memory
cards:
• Secure Digital Card (SD)
• Multimedia Card (MMC)
Insert a SD/MMC card into the 2 in-1-card slot with the metallic
contacts facing towards the display.
Notes:
1. Do not force the memory card into the slot. If you are not able to insert the memory card
easily and completely, you may have inserted it incorrectly.
