![background image](http://html.mh-extra.com/html/hyundai/kve-616/kve-616_instruction-manual_2197303024.webp)
24 / 31
IV. wARNING INDICATORS
— replace the batteries
CR2032
— scale overload, the weight exceeds 5 kg
CR2032
— unstable indicator - When the scale switched on is it the unstable state,
the LCD will indicate „UNST“. Put the scale on hard flat surface, leave it
recalibrated, it will work normal.
If symptoms such as flashing of the display or erroneous indications appear, remove the
scales away from disturbing sources (e.g. microwave oven) or turn off the source for the
term of weighing.
V. CLEANING AND MAINTENANCE
Clean the scale only after it has cooled down! Do not use coarse or aggressive
detergents (e.g. sharp things, thinners or other solvents)!
Wipe the scale surface with
a soft wet rag. Pay attention no water penetrates the appliance. DO NOT immerse the scale
in water or use chemical/abrasive cleaning agents.All parts should be cleaned immediately
after contact with fats, spices, vinegar and strongly flavored/colored foods. Avoid contact
with acids citrus juices. Never dry plastic mouldings over a heat source (e.g.
heater,
electric/gas stove
). Some food can colour the accessories in some way. However, this
does not affect the function of the appliance and it is not a reason for a claim. This colouring
usually disappears after some time.
VI. TECHNICAL SPECIFICATIONS
Maximum weighing capacity (kg)
5
Accuracy (g)
1
Weight (kg) about
0.5
Protection class of the appliance
III.
Size of the product (mm)
143 x 185 x 85
VII. LEGISLATIVE & ECOLOGy
Regarding EMC, the product conforms to the Council Directive No. 2004/108/EC as
amended. The product is in compliance with the Regulation of the European Parliament
and Council No. 1935/2004/EC on materials and articles intended to come into contact with
food.
The manufacturer reserves its right for unimportant deviations from the standard
design without influence of the product function.