23
/ 31
ENG
„ZERO“ OR „TARE“ FUNCTION
To weigh different loads consecutively without removing loads from the scale. Put first
Load on the scale, get weight reading. Press TARE button to reset the LCD reading to „0“
before adding next load. Add another item and the display will read the added weight. You
can repeat this operation. If all products are taken away from the weighing plate,a negative
value will appear on the display.
Note 1:
„ZERO“ function
When total sum of all loads on scale ≤ 2 % of scale´s max weight capacity ( 100 g when
capacity is 5 kg). LCD will show „0“ each time TARE is pressed. Max. weight capacity
remains unchanged.
Note 2:
„TARE“ function
When total sum of all loads on scale > 2 % of scale´s max weight capacity (100 g when
capacity is 5 kg). LCD will show „0“ each time TARE is pressed. LCD will show icon
„TARE“, indicating „TARE“ function is active. Max. weight capacity is reduced by total
weight of all loads.
HOw TO wEIGHT wATER/MILK
Please press MODE to change the unit to water/milk (ml). When you put the bowl onto the
scale, its weight will be shown on the display. Please press TARE to clear the weight of the
bowl. The display will show „0“ ml. Then put the water/ milk into the bowl and the display
will show the volume of the water/milk.
AUTO SHUT OFF
Auto shut-off occurs if display shows ‚0‘ or shows the same weight reading for 60 sec.
MANUAL SHUT OFF
To maximize battery life, always press ON/OFF again to turn off the scale after using.
ExCEEDING LOADING CAPACITy OF THE SCALE
Maximum weight for a product weighing is 5 kg. The display will show EEEE Error
message in case the weight of the product on the plate exceeds 5 kg. It means the product
weight exceeds the loading capacity of the scale.
Attention
–
Remove the excessive weight product from the scales to avoid damage to the
appliance.
