J300
5
INSTRUCTION MANUAL
Display
sequence
(Function mode 1)
Function
No.
Function
name
(Function mode 2)
Initialization display contents
Initialization
Setting, change
contents
Setting contents
Primary self inductance per phase.
Motor
M setting
constant
6
7
F-05
Motor
constant
2.0
100 ms
1.0
30.00 s
15.00 s
L
2(common to
acceleration
and
deceleration)
Accelera-
tion time
setting
2-stage
acceleration
time setting
Curve pattern
selection for
acceleration
Acceleration
and
deceleration
curve constant
selection
AUX M
123.60 mH
AUX J
2
0.44kgm
AUX Kp
002.00
AUX Ti
00100 ms
AUX KPP
001.00
ACC 1
0030.00 s
ACC 2
0015.00 s
ACC LINE
L
ACC GAIN
02
0 to 655.35
0 to 655.35
0 to 100.00
0 to 10000
0 to 100.00
0.01 to 3000
0.01 to 3000
L (straight line)
S (S curve)
U (U curve)
RU (reverse U
curve)
1 to 10
Smaller: High response
Larger : Low response
Set this item after the feedback
option PCB is installed.
Set this item after the feedback
option PCB is installed.
When the fuzzy most suitable
acceleration and deceleration (F-10)
are set, the time displayed here is
invalid, though it can be set.
The acceleration time can be used
when the input terminal CH1 is
shorted.
For input terminal selection, refer
to F-34 input terminal
The curve pattern is set for
acceleration and deceleration
respectively.
When the constant is set for one of
acceleration and deceleration, it is
common to both acceleration and
deceleration.
See appendix 4.
Motor
J setting
constant
Motor
constant
Kp setting
Motor
constant
Ti setting
Motor
constant
KPP setting
F-06
Acceler-
ation
time
Rated
capacity of
each inverter
Rated
capacity of
each inverter
DEC 1
0030.00 s
DEC 2
0015.00 s
DEC LINE
L
DEC GAIN
02
Motor and machine inertia
8
30.00 s
15.00 s
L
2(common to
acceleration
and
deceleration)
Decelera-
tion time
setting
2-stage
acceleration
time setting
Curve pattern
selection for
deceleration
Acceleration
and
deceleration
curve constant
selection
0.01 to 3000s
0.01 to 3000
L (straight line)
S (S curve)
U (U curve)
RU (reverse U
curve)
1 to 10
When the fuzzy most suitable
acceleration and deceleration (F-10)
are set, the time displayed here is
invalid, though it can be set.
The deceleration time can be used
when the input terminal CH1 is
shorted.
For input terminal selection, refer
to F-34 input terminal
The curve pattern is set for
acceleration and deceleration
respectively.
When the constant is set for one of
acceleration and deceleration, it is
common to both acceleration and
deceleration.
See appendix 4.
F-07
Deceler-
ation
time
0.01 to 3000
Summary of Contents for J300 series
