J300
5
INSTRUCTION MANUAL
[Setting method]
(1) Digital operator
(2) Remote operator
Select by running mode selection.
Running mode selection
0 : Normal running
1 : Energy conservation running
2 : Fuzzy most suitable acceleration and
deceleration running
When the running starts after the data is set, the
most suitable acceleration and deceleration
running is performed.
F-10 running mode selection is displayed.
Display the RUN MODE screen and select
"GOD".
Running mode selection
NOR : Normal running
OEN : Energy conservation running
GOD : Fuzzy most suitable acceleration and
deceleration running
When the running starts after the data is set, the
most suitable acceleration and deceleration
running is performed.
* When the running starts after the data is set,
the acceleration and deceleration time display
is as shown below. During the fuzzy most
suitable acceleration and deceleration running,
the acceleration and deceleration time display
is the monitor mode is invalid. (The time can
be set but the display is invalid. It becomes
valid once again during the normal running.)
2
59
a
Summary of Contents for J300 series
