background image

A running engine gives off carbon monoxide, an odourless, 

colourless and poisonous gas.

Breathing carbon monoxide can cause headache, fatigue, dizziness,  

vomiting, confusion, seizures, nausea, fainting and/or death.

• Operate the pressure washer ONLY outdoors.

• Keep exhaust gas from entering a confined area through windows, doors, ventilation

intakes, or other openings.

• DO NOT start or run the engine indoors or in an enclosed area, even if windows and 

doors are open.

IMPORTANT: Before starting the pressure washer, 

make 

sure 

you are wearing adequate and safe eye protection.

Risk of eye injury.

Spray can splash back or propel objects.

• 

Always wear safety goggles when using this equipment or in vicinity of 

where equipment is in use.

• Before starting the pressure washer, be sure you are wearing 

appropiate eye

 

protection.

Starter cord kickback (rapid retraction) can result in bodily injury. 

Kickback 

can

 pull hand and arm toward the engine faster than 

you can let 

it 

go.

Broken bones, fractures, bruises, or sprains could result.

• NEVER pull the starter cord without first relieving spray gun pressure.

• When starting the engine, pull the cord slowly until resistance is felt and then pull 

rapidly to avoid kickback.

• After each starting attempt, where the engine fails to run, always point the spray gun 

in a safe direction and squeeze the spray gun trigger to release high pressure.

• Firmly grasp the spray gun with both hands when using high pressure

spray to avoid injury when the spray gun kicks back.

Page 12

Summary of Contents for HYW3600DE2

























Reviews: