manualshive.com logo in svg

Hyundai HYW3600DE2, User Manual

Share
Download
Hyundai HYW3600DE2 User Manual Download Page 14

The high pressure stream of water that this equipment produces 

can cut through skin and its underlying tissues, leading to serious 

injury and possible amputation.

The spray gun traps high water pressure, even when engine is 

stopped and water is disconnected, which can cause injury.

Keep the high pressure hose connected to pump and spray gun while the system is 

pressurised.

•ALWAYS point the spray gun in safe direction and squeeze the spray gun trigger 

to release the high pressure, every time you stop engine.

The quick-release on the lance allows you to switch between five different quick-release 

nozzles.

The nozzles can be changed while the pressure washer is running once spray the gun 

trigger safety lock is engaged.

The different nozzles vary the spray pattern as shown above.

The high pressure stream of water that this equipment produces 

can cut through skin and its underlying tissues, leading to serious 

injury and possible amputation

• NEVER change nozzles without the trigger safety lock engaged on the spray gun.

•

DO NOT twist nozzles whilst spraying.

Figure 14

7. QUICK RELEASE NOZZLES

Page 14

Summary of Contents for HYW3600DE2

























Reviews:

No comments

Brands by name

Popular brands

Load more brands