Hyundai HYUAP580, Instruction Manual, Page: 25 / 52

ENG - 25
ENG
CLEANING AND MAINTENANCE
• During cleaning and maintenance, please turn off and unplug the device.
• Cleaning and maintenance every 2 to 3 months are recommended. If the device is exposed to
a higher extent of pollution, clean it more frequently.
Dissembling the device
• Take down the front cover: Put your hand to the flute part on top of the front cover, pull out the
front cover and take down the front cover.
• Take out the electrostatic dust collector and pre-filter.
• Take out the HEPA high-performance filter: hold the handle on two sides of the filter and gently
pull it out.
Clean the front cover
• The front cover can be cleaned with clean flowing water. If heavily polluted, you may put the
cover into the liquid with mild detergent and wash thoroughly with clean water.
Clean the Pre-filter
• Take down the pre-filter from the plasma dust collector and wash with clean flowing water. If
heavily polluted, you may put the cover into the liquid with mild detergent and wash thoroughly
with clean water.
CLEAN THE ELECTROSTATIC DUST COLLECTOR
Cleaning and maintenance of the electrostatic dust collector
• Use mild detergent to clean
• Use a scouring pad or toothbrush to clean the dust collector
• Achieve better result with warm water (below 40
o
C)
• If it is hard to eliminate all dirt, presoak with diluted detergent and then use a toothbrush to
scrub.
Electrostatic Dust Collector
Electrical Discharge Wire
Plastic Wrap